Belkin wifi router setup issue

Post Reply
lanaserena123
Posts: 1
Joined: December 19th, 2019, 11:39 am

Re: Belkin wifi router setup issue

Post by lanaserena123 » December 19th, 2019, 12:05 pm

Previously I was using a router from Asus. Last week I bought a Belkin router. As I was not able to do the setup. It has done by the technician. But the issue I am facing after connecting the printer via router is I am not able to do the print. rather it shows epson error code 0x97. May I know how do I resolve that problem.

veerjahan
Posts: 1
Joined: September 19th, 2018, 11:25 am

Re: Belkin wifi router setup issue

Post by veerjahan » September 26th, 2018, 3:51 pm

A wireless router is a device that performs the functions of a router and also includes the functions of a wireless access point. It is used to provide access to the Internet or a private computer network.

markmichael
Posts: 1
Joined: September 6th, 2018, 4:11 pm

Re: Belkin wifi router setup issue

Post by markmichael » September 6th, 2018, 5:03 pm

You can do this mainly in three ways. You can choose any of them to setup your Belkin router.

Method 1: Using the Belkin setup disk

1. Connect the modem to your Belkin router using an ethernet cable.
2. Connect your internet modem to the power supply.
3. Plugin the Belkin router to its power supply.
4. Insert the Belkin setup disk that came with your router into your system.
5. Click on the “run easy install wizard”, then follow the on-screen instructions to
connect the internet.
6. Click on Finish

Method 2: Troubleshooting Belkin router setup.

1. Position your Belkin router away from the obstacles and appliances that might
be causing interference if you are unable to establish or maintain a strong
internet connection.
2. Try disconnecting your modem from the router if you are facing problems
accessing the web-based setup.
3. Clear your internet browser’s cache and browsing history if you are facing
problems accessing the web-based setup.
4. Press and hold the reset button for at least 15 seconds on your Belkin router if
you are not unable to login directly into the router.

This method is quite long. But you can easily setup your internet connection.

Method 3: Using the manual setup

1. Connect the modem to your Belkin router setup using an ethernet cable.
2. Reconnect your internet modem to its power supply.
3. Plugin the Belkin router to its power supply.
4. Use another ethernet cable to connect your computer directly to the router.
5. Launch the web browser in your computer and type “192.681.2.1” into the
address bar.
6. Click on the login
7. Leave the password field blank and click on submit.
8. Click on the “connection type” under the “Internet WAN” section.
9. Select your internet connection type.
10. Enter the network details provided by your internet service provider and click
on “ apply changes”
11. Verify the status of your internet connection.

ushapatel
Posts: 1
Joined: March 29th, 2017, 1:08 am
Tikona User ID: 2147483647

Re: Belkin wifi router setup issue

Post by ushapatel » March 29th, 2017, 1:32 am

How to Belkin Router setup – Easy Steps

For this you need to follow these step as these steps apply to most of the Belkin router:

- At first, connect your PC with any one of the Ethernet port of the router.
- Next, you need to launch any of the web pages and then in the address bar you got to enter the IP address.
- Then next you need to click on the Login.
- Next click submits without adding any password.
- Select your type of connection as Internet WAN.
- Again click “Next”.
- Enter the ISP details and then select the Apply changes button.

Source :
Step by Step Guide on Belkin Router Setup

naseemabbas
Posts: 1
Joined: March 16th, 2017, 8:47 pm
Tikona User ID: 1120744560
Location: Bangalore
Contact:

Re: Belkin wifi router setup issue

Post by naseemabbas » March 16th, 2017, 8:53 pm

Hi profulla..I use the same belkin router.I solved it

Steps..
>Connect the LAN cable from tikona booster directly in to LAN port (Not in yellow Wan port)
>take belking router console and select to use it as access point
>then restart belking adsl router & connect it to your laptop
>then take browser & login to 1.254.254.254 (my tikona device's ip,check your device ip)
>Login to it.
>now surf google

Note: If everything works..you need to register the device to tikona by login to tikona device consiole (for me 1.254.254.254) & do automatic login and place the otp ...

If any doubt call me
naseem arakkal abbas
8xxxxxxxxx
nxxxxxxxxxxx@ymail.com

Kishan Krishnan
Posts: 6
Joined: January 26th, 2016, 2:51 pm
Tikona User ID: 1267943903

Re: Belkin wifi router setup issue

Post by Kishan Krishnan » January 26th, 2016, 3:36 pm

I read you post, Its really helpful.

TikonaCare
Posts: 64689
Joined: November 16th, 2012, 5:09 pm
Contact:

Re: Belkin wifi router setup issue

Post by TikonaCare » November 24th, 2015, 11:58 am

Dear Mr. Kale,

Greetings from Tikona.

With regards to your concern we called you on 20th Nov at 3:45 pm and 21st Nov at 10:43 am, however, we got no response both the times.

You may also check the detailed explanation on buying, installing and configuring Home Wi-Fi Router on our forum link

viewtopic.php?f=62&t=127526

For any further issues/queries, please contact us on our toll free number 1-800 209 4276.

Regards,
Tikona Care

Prafulla
Posts: 2
Joined: November 19th, 2015, 11:55 am
Tikona User ID: 1115587008

Re: Belkin wifi router setup issue

Post by Prafulla » November 23rd, 2015, 10:20 am

I did not receive your calls when I was not at home..
When I came home, I called the router setup team.
So far, two different engineers tried to help me at two different times.
None could solve the problem yet.

Let me ask a question -
Is Belkin Router N300 supported by you or not?
If not, please clearly tell so.. I will be happy to change the router.
But in that case please give me the list of routers along with specific models that are supported.

TikonaCare
Posts: 64689
Joined: November 16th, 2012, 5:09 pm
Contact:

Re: Belkin wifi router setup issue

Post by TikonaCare » November 22nd, 2015, 9:39 pm

Dear Mr. Kale,

Greetings from Tikona.

With regards to your concern, we tried reaching you several times to check the connectivity using remote access however, there was no response from your end. We request you to respond to our calls.

Further, no issues were observed from the backend.

Regards,
Tikona Care

Prafulla
Posts: 2
Joined: November 19th, 2015, 11:55 am
Tikona User ID: 1115587008

Belkin wifi router setup issue

Post by Prafulla » November 20th, 2015, 3:16 pm

Hello,
I have configured my Belkin wifi router using belkin setup site http://192.168.2.1/

After selecting Connection Type as Dynamic, Hostname=Blank and other recommended setting as per Tikona router team member, the router is still not connecting [ status=Not connected].

Tikona router team member says that the router is correctly configured.
My router supports Ethernet RJ45 connections.

When I try to load Tikona Login page, it stays in 'Loading .. please wait' state.

So, please let me know correct values of all required parameters to fix this issue.

Post Reply