Need Help in cnfiguring D-Link 2750U Wi-fi Router

Post Reply
Posts: 1
Joined: October 28th, 2014, 11:17 pm
Tikona User ID: 1111419821

Re: Need Help in cnfiguring D-Link 2750U Wi-fi Router

Post by donethatbeenthere » October 28th, 2014, 11:37 pm

It certainly is posssible. The steps:

Connect the LAN cable to LAN1 port on router and login to router ip ( for doing these setup. Login with admin/admin as userid/password.
1) Advanced Setup-> Layer2, Add atm0 with default settings
2) WAN Service -> Add with Bridge type selected, keep others default
3) Wireless ->Enable Wireless, and give your own SSID, keep others default
4) Wireless-> Security-> Give Network Authentication as WPA-Personal, and passphrase will be your own password to connect to WiFi
5) Advanced-> Interface Grouping -> Add a group named WAN, and select (WL0? Idk), LAN2, LAN3, LAN4 from right to left, Apply/Save. Now there should be 2 groups one Default with LAN1 and other with new Group Name
6) LAN -> In the right top dropdown select WAN group and disable DHCP, Apply/Save
7) Management->Settings->Backup your settings
8) Management -> RebootConnect the output from Tikona to LAN2 port on the router, connect your laptop to Wifi on the router using the SSID/passphrase.
This should work, else shutdown router for 10 seconds, disable your wireless network and log-off/on again, enable wireless network and try connecting again.After this the ethernet wire coming from Tikona should be connected to LAN2 port, and you can use wifi. Note that LAN1 port is used to connect to the router only ( after this setup.

Credits: smshashi from
Source: ... 50u.61310/


Posts: 65409
Joined: November 16th, 2012, 5:09 pm

Re: Need Help in cnfiguring D-Link 2750U Wi-fi Router

Post by TikonaCare » March 16th, 2014, 7:31 pm

Dear Mr. Jindal,

Greetings from Tikona.

With regards to your request regarding personal router configuration, we confirm that required settings have been done and you are able to use the services wirelessly.

Further, your account was kept under observation for a week and found that wireless services are working fine.

Following is the link for the personal router configuration for your future reference:

Link: viewtopic.php?f=50&t=119&start=30

We thank you for your association with Tikona for past 6 months and look forward to have many more years of association with you.

For any further issues/queries, please contact us on our toll free number 1-800 209 4276.

Tikona Care

Posts: 1
Joined: March 5th, 2014, 10:46 pm
Tikona User ID: 1108804807

Need Help in cnfiguring D-Link 2750U Wi-fi Router

Post by saurabh_jindal » March 5th, 2014, 10:55 pm


I am not able to configure D-Link Wireless N 300 ADSL2 router. Please help.
I have called your toll free but they could not help.


Post Reply