Page 1 of 1

Re: How to configure Mobile Devices

Posted: January 21st, 2014, 3:19 pm
by TikonaCare
Dear Mr. Bhat,

Greetings from Tikona.

With regards to your concern, as discussed by default subtype has to be PEAP.

We thank you for your association with Tikona for past 6 months and look forward to have many more years of association with you.

For any further issues/queries, please contact us on our toll free number 1-800 209 4276.

Tikona Care

Re: How to configure Mobile Devices

Posted: January 18th, 2014, 9:07 pm
by amitbhat
What will be the Encryption type for EAP-PEAP in case of mobile device especially Nokia.

How to configure Mobile Devices

Posted: November 16th, 2012, 4:15 pm
by Prasad
Please ensure following prerequisites before you start configuration.
1. The Mobile device should be WI-FI enabled
2. It should support 802.1x, WPA2 Enterprise security feature.

Note: If Customer is using Personal WI-FI Router then below settings won’t work, instead customer has to do settings as per Personal Router Configuration. i.e. connect to SSID of personal Router and provide passphrase key.

Please find below common technical settings for Mobile Devices.

1. SSID/Network Name: tikonawifi
2. Security Type : 802.1x EAP or WPA2 Enterprise
3. EAP method /Subtype : PEAP (not required for Apple)
4. Phase 2 auth. Or Inner Link Security : MSCHAPV2 (only required for Nokia & BB)
5. User ID : Tikona User id
6. Password : tikona password
7. SSID Broadcasted : No
8. Network Mode : Infrastructure
9. Server Certificate Validation
> User Can disable Server certificate Validation . If this is not feasible in the device ,Download certificate from Our Website -> Products & Sevrices -> For Homes -> Tikona Care -> Tikona Unifi Certificate